All MIBs › CISCO-MGX82XX-DSX3-MIB › dsx3PlcpLineAlarmState
dsx3PlcpLineAlarmState
Module: CISCO-MGX82XX-DSX3-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineAlarmState
OID (numeric): 1.3.6.1.4.1.351.110.4.4.2.3.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This variable is a bitmap of the DSX3 Line alarms.
A value of zero indicates no alarms.
Itemized below are the individual bits:
BitPosition Alarm
----------- -----
0 Receiving RAI
1 Transmitting RAI
2 Receiving OOF
3 Receiving LSS Link Up
4 Transmitting LSS Link Up
5 Receiving LSS Link Down
6 Transmitting LSS Link Down
7 Near End Local Loopback in effect
8 Near End Remote Loopback in effect
What is dsx3PlcpLineAlarmState?
A read-only bitmap reporting active DSX3 line alarm conditions on the interface (e.g. receiving RAI, alarm transitions), where zero means no alarms are present.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.2.3.1.1.1 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.2.3.1.1.1.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineAlarmState.1
Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineAlarmState OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4 | dsx3 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4.2 | dsx3Framing | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.4.2.3 | dsx3PlcpAlarm | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.2.3.1 | dsx3PlcpAlarmTable | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.2.3.1.1 | dsx3PlcpAlarmEntry | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.2.3.1.1.1 | dsx3PlcpLineAlarmState | CISCO-MGX82XX-DSX3-MIB |