CISCO-MGX82XX-DSX3-MIB :: dsx3NearEndLoopbkLineStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MGX82XX-DSX3-MIBdsx3NearEndLoopbkLineStatus

dsx3NearEndLoopbkLineStatus

Module: CISCO-MGX82XX-DSX3-MIB

OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3NearEndLoopbkLineStatus

OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.28

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This is a bitmap of the DSX3 NearEnd line
  loopback status bits
  BitPosition    Loopback indicator
  -----------    -----
  1              DS1 Line 1
  2              DS1 Line 2
  3              DS1 Line 3
  4              DS1 Line 4
  5              DS1 Line 5
  6              DS1 Line 6
  7              DS1 Line 7
  8              DS1 Line 8
  9              DS1 Line 9
  10             DS1 Line 10
  11             DS1 Line 11
  12             DS1 Line 12
  ...
  ...
  ...
  28             DS1 Line 28
  29             DS1 Line 29
  30             DSX3     

For CESM-T3/E3, only DSX3 bit (bit 30) is valid.

What is dsx3NearEndLoopbkLineStatus?

Read-only bitmap reporting which DS1 lines (1-4) within the DS3 are currently in near-end loopback, showing the local loopback status of each T1 tributary.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.28
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3NearEndLoopbkLineStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.28.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3NearEndLoopbkLineStatus.1

Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3NearEndLoopbkLineStatus OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.4dsx3BASIS-MIB
1.3.6.1.4.1.351.110.4.4.1dsx3LineBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.4.1.1dsx3ConfigCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1cwDsx3ConfigTableCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1cwDsx3ConfigEntryCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1.28dsx3NearEndLoopbkLineStatusCISCO-MGX82XX-DSX3-MIB