CISCO-MGX82XX-DSX3-MIB :: dsx3LineXmtFEACCode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MGX82XX-DSX3-MIBdsx3LineXmtFEACCode

dsx3LineXmtFEACCode

Module: CISCO-MGX82XX-DSX3-MIB

OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3LineXmtFEACCode

OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable indicates what bit-oriented code to transmit over the far-end alarm and control (FEAC) channel.

The values mean:

dsx3SendNoCode sending looped or normal data dsx3SendLineCode sending a request for a line loopback dsx3SendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame) dsx3SendResetCode sending a loopback deactivation request. dsx3SendDS1LoopCode sending a request to put part of DS1/E1 within T3/E3 respectively into loopback. dsx3SendTestPattern sending a test pattern. This object is not applicable for CESM-T3/E3

What is dsx3LineXmtFEACCode?

Controls which bit-oriented code is transmitted on the DS3 far-end alarm and control (FEAC) channel, such as requesting a line loopback or sending normal/looped data.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.9
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineXmtFEACCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.9.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineXmtFEACCode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.9.1 i <value>

Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3LineXmtFEACCode OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.4dsx3BASIS-MIB
1.3.6.1.4.1.351.110.4.4.1dsx3LineBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.4.1.1dsx3ConfigCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1cwDsx3ConfigTableCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1cwDsx3ConfigEntryCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1.9dsx3LineXmtFEACCodeCISCO-MGX82XX-DSX3-MIB