All MIBs › CISCO-MGX82XX-DSX3-MIB › dsx3LineStatisticalAlarmState
dsx3LineStatisticalAlarmState
Module: CISCO-MGX82XX-DSX3-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3LineStatisticalAlarmState
OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.3.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This is a bitmap of the DSX3 Line Statistical
Alarms on the card. Zero indicates no alarms.
Itemized below are the individual alarm bits:
BitPosition Alarm
----------- -----
0 LCV 15 minute threshold exceeded
1 LCV 24 hour threshold exceeded
2 LES 15 minute threshold exceeded
3 LES 24 hour threshold exceeded
4 LSES 15 minute threshold exceeded
5 LSES 24 hour threshold exceeded
6 PCV 15 minute threshold exceeded
7 PCV 24 hour threshold exceeded
8 PES 15 minute threshold exceeded
9 PES 24 hour threshold exceeded
10 PSES 15 minute threshold exceeded
11 PSES 24 hour threshold exceeded
12 SEFS 15 minute threshold exceeded
13 SEFS 24 hour threshold exceeded
14 AISS 15 minute threshold exceeded
15 AISS 24 hour threshold exceeded
16 UAS 15 minute threshold exceeded
17 UAS 24 hour threshold exceeded
18 BIP8CV/G.832 15 minute threshold exceeded
19 BIP8CV/G.832 24 hour threshold exceeded
20 BIP8ES/G.832 15 minute threshold exceeded
21 BIP8ES/G.832 24 hour threshold exceeded
22 BIP8SES/G.832 15 minute threshold exceeded
23 BIP8SES/G.832 24 hour threshold exceeded
24 CCV 15 minute threshold exceeded
25 CCV 24 hour threshold exceeded
26 CES 15 minute threshold exceeded
27 CES 24 hour threshold exceeded
28 CSES 15 minute threshold exceeded
29 CSES 24 hour threshold exceeded
Bits 18 to 23 do not have any significance if the framing is
G.751(which is used in FRSM_VHS)
only bits 0,1,2,3,4,5,16 and 17 are applicable to CESM-T3/E3.
What is dsx3LineStatisticalAlarmState?
A read-only bitmap reporting which DSX3 line statistical alarms (e.g., LCV 15-minute threshold exceeded) are currently active on the card, with zero meaning no alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.3.1.1.2 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineStatisticalAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.3.1.1.2.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineStatisticalAlarmState.1
Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3LineStatisticalAlarmState OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4 | dsx3 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4.1 | dsx3Line | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.4.1.3 | dsx3Alarm | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.3.1 | dsx3AlarmTable | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.3.1.1 | dsx3AlarmEntry | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.3.1.1.2 | dsx3LineStatisticalAlarmState | CISCO-MGX82XX-DSX3-MIB |