CISCO-MGX82XX-DSX3-MIB :: dsx3LineOOFCriteria

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MGX82XX-DSX3-MIBdsx3LineOOFCriteria

dsx3LineOOFCriteria

Module: CISCO-MGX82XX-DSX3-MIB

OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3LineOOFCriteria

OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the out of frame decision criteria. OOF is declared when errors are detected in the framing octets for four consecuitive frames.

fBits3Of8(1) : an OOF condition is declared if at least 3 of 8 framing bits are in error.

fBits3Of16(2): an OOF is declared if 3 of 16 framing bits are found to be in error. notApplicable(3) : used in case where it is not applicable. This value can not be set.

This object is not applicable when cwDsx3LineType is set to g832-g804(2) or g751(4). This object is not applicable for CESM-T3/E3

What is dsx3LineOOFCriteria?

This read-write object specifies the criteria used to declare an out-of-frame (OOF) condition on the DS3 line, such as requiring a certain fraction of framing bits to be in error across consecutive frames.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.5
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineOOFCriteria

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.5.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineOOFCriteria.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.5.1 i <value>

Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3LineOOFCriteria OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.4dsx3BASIS-MIB
1.3.6.1.4.1.351.110.4.4.1dsx3LineBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.4.1.1dsx3ConfigCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1cwDsx3ConfigTableCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1cwDsx3ConfigEntryCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1.5dsx3LineOOFCriteriaCISCO-MGX82XX-DSX3-MIB