All MIBs › CISCO-MGX82XX-DSX3-MIB › dsx3LineLoopbackCommand
dsx3LineLoopbackCommand
Module: CISCO-MGX82XX-DSX3-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3LineLoopbackCommand
OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable represents the loopback configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx3RemoteLineLoop Near End loops back Remote data dsx3LocalLineLoop Near End loops back Local data(outbound). dsx3InboundLoopback Near End in bound loopback Local data(inbound).
What is dsx3LineLoopbackCommand?
Read-write control that sets or reports the loopback mode of a DS3/E3 interface (e.g. no loopback vs. various loopback configurations), used for testing the line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineLoopbackCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineLoopbackCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dsx3LineLoopbackCommand.1
Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3LineLoopbackCommand OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4 | dsx3 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4.1 | dsx3Line | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.4.1.1 | dsx3Config | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1 | cwDsx3ConfigTable | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1.1 | cwDsx3ConfigEntry | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1.1.7 | dsx3LineLoopbackCommand | CISCO-MGX82XX-DSX3-MIB |