CISCO-MGX82XX-DSX3-MIB :: dsx3LineBERTEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MGX82XX-DSX3-MIBdsx3LineBERTEnable

dsx3LineBERTEnable

Module: CISCO-MGX82XX-DSX3-MIB

OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3LineBERTEnable

OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object enables/disables the BERT function on an interface.

The possible values are : disabled(1): disables port BERT functionality enabled (2): enables port BERT functionality. value specified in dsx3LineBERTPattern is transmitted over the interface. The far end may be looped back and the test pattern verified.

What is dsx3LineBERTEnable?

Enables or disables Bit Error Rate Test (BERT) functionality on the DS3/E3 interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.10
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineBERTEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.10.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineBERTEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.10.1 i <value>

Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3LineBERTEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.4dsx3BASIS-MIB
1.3.6.1.4.1.351.110.4.4.1dsx3LineBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.4.1.1dsx3ConfigCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1cwDsx3ConfigTableCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1cwDsx3ConfigEntryCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.1.1.1.10dsx3LineBERTEnableCISCO-MGX82XX-DSX3-MIB