All MIBs › CISCO-MGX82XX-DSX3-MIB › dsx3LineAIScBitsCheck
dsx3LineAIScBitsCheck
Module: CISCO-MGX82XX-DSX3-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3LineAIScBitsCheck
OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If check C-Bits options is chosen then AIS is declared when 1010 pattern is found and C-Bits are all zero. In the other case an AIS condition is declared when the AIS pattern 1010... is detected irrespective of the state of the C Bits. This object does not apply to the E3 interface. The value notApplicable(3) is used in case of interfaces where this object is not applicable.
This object is not applicable for CESM-T3/E3.
What is dsx3LineAIScBitsCheck?
Configures whether Alarm Indication Signal (AIS) detection on the DS3/E3 line requires checking the C-bits (all zero) alongside the 1010 pattern, or just the pattern alone, to declare an AIS condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineAIScBitsCheck
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3LineAIScBitsCheck.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.6.1 i <value>
Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3LineAIScBitsCheck OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4 | dsx3 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4.1 | dsx3Line | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.4.1.1 | dsx3Config | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1 | cwDsx3ConfigTable | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1.1 | cwDsx3ConfigEntry | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1.1.6 | dsx3LineAIScBitsCheck | CISCO-MGX82XX-DSX3-MIB |