CISCO-MGX82XX-DSX3-MIB :: dsx3FEAlarmThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MGX82XX-DSX3-MIBdsx3FEAlarmThreshold

dsx3FEAlarmThreshold

Module: CISCO-MGX82XX-DSX3-MIB

OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3FEAlarmThreshold

OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.2.1.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The value set in this object determines the value that the alarm integration counter must reach for an far end Alarm to be declared. If the up count is 6, the down count is 1 and the threshold 1500, an Alarm is integrated in 2.5 sec and removed in 15 seconds. This object is not applicable for CESM-T3/E3.

What is dsx3FEAlarmThreshold?

Read-write threshold that the far-end alarm integration counter must reach before a far-end alarm is declared, setting the alarm's integration/clearing timing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.2.1.1.8
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3FEAlarmThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.2.1.1.8.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3FEAlarmThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.2.1.1.8.1 i <value>

Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3FEAlarmThreshold OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.4dsx3BASIS-MIB
1.3.6.1.4.1.351.110.4.4.1dsx3LineBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.4.1.2dsx3AlarmConfigCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.2.1dsx3AlarmConfigTableCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.2.1.1dsx3AlarmConfigEntryCISCO-MGX82XX-DSX3-MIB
1.3.6.1.4.1.351.110.4.4.1.2.1.1.8dsx3FEAlarmThresholdCISCO-MGX82XX-DSX3-MIB