All MIBs › CISCO-MGX82XX-DSX3-MIB › dsx3DsuSelect
dsx3DsuSelect
Module: CISCO-MGX82XX-DSX3-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3DsuSelect
OID (numeric): 1.3.6.1.4.1.351.110.4.4.1.1.1.1.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The dsx3DsuSelect variable controls the type of DSU mode to be selected. The 'dsx3SubRateEnable' has to be set to 'enable' before selecting the mode in 'dsx3DsuSelect'.
The possible values for this are :
dl3100Mode - Indicates compatibility with Digital Link Inc's DL3100 DSU mode of operation. This mode permits line rates to be in multiples of 300 Kbps. adcKentroxMode - Indicates compatibility with ADC Kentrox's DSU. This mode permits line rates to be in multiples of 500 Kbps. larsCom - Indicates compatability with LarsCom DSU. clearChannel - Indicates the standard G.751 framing format (12 overhead bits and 1524 data bits in an E3 frame).This option is supported only in FRSM-2E3. dsuAlgorithm1 - dsuAlgorith4 - Presently this is not used in any of the cards. This object is supported only in FRSM-VHS cards.
It is recommended that this object is not instantiated in case of cards which does not support DSU functionality.
What is dsx3DsuSelect?
Read-write setting that selects the DSU compatibility mode (e.g. Digital Link or ADC Kentrox style) used when DS3 subrate operation is enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.30 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3DsuSelect
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.30.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3DsuSelect.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.4.1.1.1.1.30.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dsx3DsuSelect.1
Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3DsuSelect OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4 | dsx3 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4.1 | dsx3Line | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.4.1.1 | dsx3Config | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1 | cwDsx3ConfigTable | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1.1 | cwDsx3ConfigEntry | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.1.1.1.1.30 | dsx3DsuSelect | CISCO-MGX82XX-DSX3-MIB |