CISCO-MGX82XX-DSX3-BERT-MIB :: dsx3bertStartTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-MGX82XX-DSX3-BERT-MIB › dsx3bertStartTime

dsx3bertStartTime

Module: CISCO-MGX82XX-DSX3-BERT-MIB

OID (symbolic): CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartTime

OID (numeric): 1.3.6.1.4.1.351.110.6.2.12

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: This object contains the time at which BERT started. The syntax is hh:mm:ss. The time zone is as configured in the shelf.

This object contains zero length string for following values of dsx3bertControl: noAction (0), acquireBert (1), releaseBert (2), cnfBert (3).

What is dsx3bertStartTime?

This read-only object reports the time of day (hh:mm:ss, shelf time zone) at which the BERT test started, returning an empty string when no test has been acquired, released, or configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.12
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.12.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartTime.1

Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartTime OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.6axisDiagnosticsBASIS-MIB
1.3.6.1.4.1.351.110.6.2rasDskBASIS-RAS-DISK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.6.2.12dsx3bertStartTimeCISCO-MGX82XX-DSX3-BERT-MIB