All MIBs › CISCO-MGX82XX-DSX3-BERT-MIB › dsx3bertStartDate
dsx3bertStartDate
Module: CISCO-MGX82XX-DSX3-BERT-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartDate
OID (numeric): 1.3.6.1.4.1.351.110.6.2.13
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: This object contains the date on which BERT started. The syntax is yy/mm/dd.
This object contains zero length string for following values of dsx3bertControl: noAction (0), acquireBert (1), releaseBert (2), cnfBert (3).
What is dsx3bertStartDate?
This read-only object reports the date (yy/mm/dd) on which the BERT test started, returning an empty string when the corresponding BERT control action has not occurred.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.13 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartDate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.13.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartDate.1
Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertStartDate OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6.2 | rasDsk | BASIS-RAS-DISK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.2.13 | dsx3bertStartDate | CISCO-MGX82XX-DSX3-BERT-MIB |