All MIBs › CISCO-MGX82XX-DSX3-BERT-MIB › dsx3bertMode
dsx3bertMode
Module: CISCO-MGX82XX-DSX3-BERT-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertMode
OID (numeric): 1.3.6.1.4.1.351.110.6.2.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the mode, the BERT module is to be configured for. The value loopback(2) is not supported in CESM-T3E3 and FRSM-2T3E3 .
What is dsx3bertMode?
This read-write object configures the operating mode of the BERT module for the test; the loopback mode option is not supported on CESM-T3E3 or FRSM-2T3E3 cards.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.9 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.9.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.6.2.9.1 i <value>
Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertMode OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6.2 | rasDsk | BASIS-RAS-DISK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.2.9 | dsx3bertMode | CISCO-MGX82XX-DSX3-BERT-MIB |