All MIBs › CISCO-MEDIATRACE-MIB › cMTInitiatorEnable
cMTInitiatorEnable
Module: CISCO-MEDIATRACE-MIB
OID (symbolic): CISCO-MEDIATRACE-MIB::cMTInitiatorEnable
OID (numeric): 1.3.6.1.4.1.9.9.800.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies the whether the Mediatrace initiator is enabled on the network element.
What is cMTInitiatorEnable?
A read-write control that enables or disables the Mediatrace initiator function on the network element.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.800.1.1.2 snmpwalk -v2c -c public <target> CISCO-MEDIATRACE-MIB::cMTInitiatorEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.800.1.1.2.1 snmpget -v2c -c public <target> CISCO-MEDIATRACE-MIB::cMTInitiatorEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.800.1.1.2.1 s <value>
Start monitoring Cisco routers and switches (IOS/IOS XE Mediatrace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MEDIATRACE-MIB::cMTInitiatorEnable OID value, configure state conditions and alerts, and monitor any Cisco routers and switches (IOS/IOS XE Mediatrace) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.800 | ciscoMediatraceMIB | CISCO-MEDIATRACE-MIB |
| 1.3.6.1.4.1.9.9.800.1 | ciscoMediatraceMIBObjects | CISCO-MEDIATRACE-MIB |
| 1.3.6.1.4.1.9.9.800.1.1 | cMTCtrl | CISCO-MEDIATRACE-MIB |
| 1.3.6.1.4.1.9.9.800.1.1.2 | cMTInitiatorEnable | CISCO-MEDIATRACE-MIB |