All MIBs › CISCO-LWAPP-WLAN-MIB › cLWlanWlanUSBurstRealTimeDataRate
cLWlanWlanUSBurstRealTimeDataRate
Module: CISCO-LWAPP-WLAN-MIB
OID (symbolic): CISCO-LWAPP-WLAN-MIB::cLWlanWlanUSBurstRealTimeDataRate
OID (numeric): 1.3.6.1.4.1.9.9.512.1.1.3.1.24
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
This object specifies burst real time data rate per wlan on upstream. Value of 0 indicates that feature is disabled.
What is cLWlanWlanUSBurstRealTimeDataRate?
Configures/reports the burst real-time upstream data rate allowed per WLAN; a value of 0 means the feature is disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.512.1.1.3.1.24 snmpwalk -v2c -c public <target> CISCO-LWAPP-WLAN-MIB::cLWlanWlanUSBurstRealTimeDataRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.512.1.1.3.1.24.1 snmpget -v2c -c public <target> CISCO-LWAPP-WLAN-MIB::cLWlanWlanUSBurstRealTimeDataRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.512.1.1.3.1.24.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1 | ciscoLwappWlanMIBObjects | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1 | ciscoLwappWlanConfig | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1.3 | cLWlanConfigQosTable | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1.3.1 | cLWlanConfigQosEntry | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1.3.1.24 | cLWlanWlanUSBurstRealTimeDataRate | CISCO-LWAPP-WLAN-MIB |