All MIBs › CISCO-LWAPP-WLAN-MIB › cLWlan11axMuMimoUplinkEnable
cLWlan11axMuMimoUplinkEnable
Module: CISCO-LWAPP-WLAN-MIB
OID (symbolic): CISCO-LWAPP-WLAN-MIB::cLWlan11axMuMimoUplinkEnable
OID (numeric): 1.3.6.1.4.1.9.9.512.1.1.9.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether 11ax Multi User Multiple Input Multiple output Uplink is enabled or disabled for the WLAN. MIMO is an antenna technology for wireless communications in which multiple antennas are used at both the source (transmitter) and the destination (receiver).The 802.11ax Multi-user MIMO allow more users to claim MIMO simultaneously.
A value of 'true' indicates that 11ax MU MIMO uplink is enabled on WLAN. A value of 'false' indicates that 11ax MU MIMO uplink is disabled on the WLAN.
What is cLWlan11axMuMimoUplinkEnable?
Indicates whether 802.11ax Multi-User MIMO uplink, which lets multiple client antennas transmit to the AP simultaneously, is enabled for the WLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.512.1.1.9.1.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-WLAN-MIB::cLWlan11axMuMimoUplinkEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.512.1.1.9.1.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-WLAN-MIB::cLWlan11axMuMimoUplinkEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.512.1.1.9.1.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cLWlan11axMuMimoUplinkEnable.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-WLAN-MIB::cLWlan11axMuMimoUplinkEnable OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1 | ciscoLwappWlanMIBObjects | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1 | ciscoLwappWlanConfig | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1.9 | cLWlan11axConfigTable | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1.9.1 | cLWlan11axConfigEntry | CISCO-LWAPP-WLAN-MIB |
| 1.3.6.1.4.1.9.9.512.1.1.9.1.1 | cLWlan11axMuMimoUplinkEnable | CISCO-LWAPP-WLAN-MIB |