CISCO-LWAPP-WLAN-MIB :: cLAPGroupTrafficQinqEnabled

MIB Reference — IPNetwork Monitor

All MIBsCISCO-LWAPP-WLAN-MIBcLAPGroupTrafficQinqEnabled

cLAPGroupTrafficQinqEnabled

Module: CISCO-LWAPP-WLAN-MIB

OID (symbolic): CISCO-LWAPP-WLAN-MIB::cLAPGroupTrafficQinqEnabled

OID (numeric): 1.3.6.1.4.1.9.9.512.1.2.5.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description:

This object specifies the QinQ state for this AP group QinQ is used to append an external VLAN tag for client which connected to the AP that belong to this AP Group - A value of 'true' indicates QinQ is enabled. - A value of 'false' indicates the QinQ is disabled.

What is cLAPGroupTrafficQinqEnabled?

Enables or disables QinQ (double VLAN tagging) for an AP group, which appends an external VLAN tag to traffic from clients connecting through APs in that group.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.512.1.2.5.1.1
snmpwalk -v2c -c public <target> CISCO-LWAPP-WLAN-MIB::cLAPGroupTrafficQinqEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.512.1.2.5.1.1.1
snmpget -v2c -c public <target> CISCO-LWAPP-WLAN-MIB::cLAPGroupTrafficQinqEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.512.1.2.5.1.1.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.512ciscoLwappWlanMIBCISCO-LWAPP-WLAN-MIB
1.3.6.1.4.1.9.9.512.1ciscoLwappWlanMIBObjectsCISCO-LWAPP-WLAN-MIB
1.3.6.1.4.1.9.9.512.1.2ciscoLwappAPGroupsVlanConfigCISCO-LWAPP-WLAN-MIB
1.3.6.1.4.1.9.9.512.1.2.5cLAPGroupQinqConfigTableCISCO-LWAPP-WLAN-MIB
1.3.6.1.4.1.9.9.512.1.2.5.1cLAPGroupQinqConfigEntryCISCO-LWAPP-WLAN-MIB
1.3.6.1.4.1.9.9.512.1.2.5.1.1cLAPGroupTrafficQinqEnabledCISCO-LWAPP-WLAN-MIB