CISCO-LWAPP-MESH-MIB :: clMeshIsIdsEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-MESH-MIBclMeshIsIdsEnable

clMeshIsIdsEnable

Module: CISCO-LWAPP-MESH-MIB

OID (symbolic): CISCO-LWAPP-MESH-MIB::clMeshIsIdsEnable

OID (numeric): 1.3.6.1.4.1.9.9.616.1.2.21

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies the Rogue and Signature Detection status. A value of 'true' indicates that IDS is enabled. A value of 'false' indicates that IDS is disabled.

What is clMeshIsIdsEnable?

Controls whether rogue-device and signature-based intrusion detection (IDS) is enabled on the mesh network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.616.1.2.21
snmpwalk -v2c -c public <target> CISCO-LWAPP-MESH-MIB::clMeshIsIdsEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.616.1.2.21.1
snmpget -v2c -c public <target> CISCO-LWAPP-MESH-MIB::clMeshIsIdsEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.616.1.2.21.1 s <value>

Start monitoring Cisco wireless access points and controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MESH-MIB::clMeshIsIdsEnable OID value, configure state conditions and alerts, and monitor any Cisco wireless access points and controllers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.616ciscoLwappMeshMIBCISCO-LWAPP-MESH-MIB
1.3.6.1.4.1.9.9.616.1ciscoLwappMeshMIBObjectsCISCO-LWAPP-MESH-MIB
1.3.6.1.4.1.9.9.616.1.2ciscoLwappMeshGlobalConfigCISCO-LWAPP-MESH-MIB
1.3.6.1.4.1.9.9.616.1.2.21clMeshIsIdsEnableCISCO-LWAPP-MESH-MIB