All MIBs › CISCO-LWAPP-MESH-MIB › clMeshHighSNRThresholdAbate
clMeshHighSNRThresholdAbate
Module: CISCO-LWAPP-MESH-MIB
OID (symbolic): CISCO-LWAPP-MESH-MIB::clMeshHighSNRThresholdAbate
OID (numeric): 1.3.6.1.4.1.9.9.616.1.2.17
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the abate threshold value of SNR. This threshold value is used to determine if the SNR value seen by the child mesh node has reached below this level and is use to trigger the 'ciscoLwappMeshAbateHighSNR' notification.
What is clMeshHighSNRThresholdAbate?
Configures the signal-to-noise ratio (SNR) threshold below which a child mesh node's link is considered to have dropped out of the high-SNR condition, triggering the ciscoLwappMeshAbateHighSNR notification.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.616.1.2.17 snmpwalk -v2c -c public <target> CISCO-LWAPP-MESH-MIB::clMeshHighSNRThresholdAbate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.616.1.2.17.1 snmpget -v2c -c public <target> CISCO-LWAPP-MESH-MIB::clMeshHighSNRThresholdAbate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.616.1.2.17.1 i <value>
Start monitoring Cisco wireless access points and controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MESH-MIB::clMeshHighSNRThresholdAbate OID value, configure state conditions and alerts, and monitor any Cisco wireless access points and controllers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.616 | ciscoLwappMeshMIB | CISCO-LWAPP-MESH-MIB |
| 1.3.6.1.4.1.9.9.616.1 | ciscoLwappMeshMIBObjects | CISCO-LWAPP-MESH-MIB |
| 1.3.6.1.4.1.9.9.616.1.2 | ciscoLwappMeshGlobalConfig | CISCO-LWAPP-MESH-MIB |
| 1.3.6.1.4.1.9.9.616.1.2.17 | clMeshHighSNRThresholdAbate | CISCO-LWAPP-MESH-MIB |