All MIBs › CISCO-LWAPP-MESH-MIB › clMeshEthBridgingAllowBpdu
clMeshEthBridgingAllowBpdu
Module: CISCO-LWAPP-MESH-MIB
OID (symbolic): CISCO-LWAPP-MESH-MIB::clMeshEthBridgingAllowBpdu
OID (numeric): 1.3.6.1.4.1.9.9.616.1.2.30
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether we should allow BPDU packets in the mesh network when ethernet bridging is enabled. A value of 'true' indicates BPDU packets are allowed in mesh network. A value of 'false' indicates BPDU packets are dropped in mesh network.
What is clMeshEthBridgingAllowBpdu?
Controls whether Bridge Protocol Data Unit (BPDU) packets are allowed to pass through the mesh network when Ethernet bridging is enabled, or are dropped instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.616.1.2.30 snmpwalk -v2c -c public <target> CISCO-LWAPP-MESH-MIB::clMeshEthBridgingAllowBpdu
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.616.1.2.30.1 snmpget -v2c -c public <target> CISCO-LWAPP-MESH-MIB::clMeshEthBridgingAllowBpdu.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.616.1.2.30.1 s <value>
Start monitoring Cisco wireless access points and controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MESH-MIB::clMeshEthBridgingAllowBpdu OID value, configure state conditions and alerts, and monitor any Cisco wireless access points and controllers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.616 | ciscoLwappMeshMIB | CISCO-LWAPP-MESH-MIB |
| 1.3.6.1.4.1.9.9.616.1 | ciscoLwappMeshMIBObjects | CISCO-LWAPP-MESH-MIB |
| 1.3.6.1.4.1.9.9.616.1.2 | ciscoLwappMeshGlobalConfig | CISCO-LWAPP-MESH-MIB |
| 1.3.6.1.4.1.9.9.616.1.2.30 | clMeshEthBridgingAllowBpdu | CISCO-LWAPP-MESH-MIB |