All MIBs › CISCO-LWAPP-IPV6-MIB › cLIpv6NbRaThrottleAllowNoLimitEnabled
cLIpv6NbRaThrottleAllowNoLimitEnabled
Module: CISCO-LWAPP-IPV6-MIB
OID (symbolic): CISCO-LWAPP-IPV6-MIB::cLIpv6NbRaThrottleAllowNoLimitEnabled
OID (numeric): 1.3.6.1.4.1.9.9.847.1.1.4.8
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies the RA policy throttle allowable no limit value. A value of 'true' indicates that, the value for cLIpv6RaThrottlerPolicyAllowAtmost will not be set. A value of 'false' indicates that, the value for cLIpv6RaThrottlerPolicyAllowAtmost will be set.
What is cLIpv6NbRaThrottleAllowNoLimitEnabled?
When set to true, removes the cap on the allowable RA throttle limit so no maximum is enforced; false applies the configured allow-at-most value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.847.1.1.4.8 snmpwalk -v2c -c public <target> CISCO-LWAPP-IPV6-MIB::cLIpv6NbRaThrottleAllowNoLimitEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.847.1.1.4.8.1 snmpget -v2c -c public <target> CISCO-LWAPP-IPV6-MIB::cLIpv6NbRaThrottleAllowNoLimitEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.847.1.1.4.8.1 s <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-IPV6-MIB::cLIpv6NbRaThrottleAllowNoLimitEnabled OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.847 | ciscoLwappIpv6MIB | CISCO-LWAPP-IPV6-MIB |
| 1.3.6.1.4.1.9.9.847.1 | ciscoLwappIpv6MIBObjects | CISCO-LWAPP-IPV6-MIB |
| 1.3.6.1.4.1.9.9.847.1.1 | ciscoLwappIpv6Config | CISCO-LWAPP-IPV6-MIB |
| 1.3.6.1.4.1.9.9.847.1.1.4 | ciscoLwappIpv6NbRaThrottleConfig | CISCO-LWAPP-IPV6-MIB |
| 1.3.6.1.4.1.9.9.847.1.1.4.8 | cLIpv6NbRaThrottleAllowNoLimitEnabled | CISCO-LWAPP-IPV6-MIB |