All MIBs › CISCO-LWAPP-HA-MIB › cLHaKATimeout

cLHaKATimeout

OID (symbolic): CISCO-LWAPP-HA-MIB::cLHaKATimeout

OID (numeric): 1.3.6.1.4.1.9.9.843.1.1.16

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies keep alive timeout value in milli seconds between 100 and 1000. The value for this object configured in multiples of 50.

What is cLHaKATimeout?

Configures the HA keepalive timeout in milliseconds (100-1000, in 50ms increments) used to detect peer controller failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.843.1.1.16
snmpwalk -v2c -c public <target> CISCO-LWAPP-HA-MIB::cLHaKATimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.843.1.1.16.1
snmpget -v2c -c public <target> CISCO-LWAPP-HA-MIB::cLHaKATimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.843.1.1.16.1 i <value>

Start monitoring Cisco Wireless LAN Controller (WLC) pair configured for HA/SSO with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-HA-MIB::cLHaKATimeout OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controller (WLC) pair configured for HA/SSO from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.843	ciscoLwappHaMIB	CISCO-LWAPP-HA-MIB
1.3.6.1.4.1.9.9.843.1	ciscoLwappHaMIBObjects	CISCO-LWAPP-HA-MIB
1.3.6.1.4.1.9.9.843.1.1	ciscoLwappHaGlobalConfig	CISCO-LWAPP-HA-MIB
1.3.6.1.4.1.9.9.843.1.1.16	cLHaKATimeout	CISCO-LWAPP-HA-MIB

CISCO-LWAPP-HA-MIB :: cLHaKATimeout

cLHaKATimeout

Module

This MIB depends on