CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB :: cldccManufacturerInfoStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIBcldccManufacturerInfoStatus

cldccManufacturerInfoStatus

Module: CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB

OID (symbolic): CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB::cldccManufacturerInfoStatus

OID (numeric): 1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.1

Node type: OBJECT-TYPE

Type: CiscoLwappDot11ClientReqStatus

Access: read-write

Description: This object specifies the status of current request. To trigger a request to the client to get the manufacturer information, this attribute is set to initiate(1). Once the request is triggered, the agent will set the value to inProgress(2). Based on the progress of the request, this is later updated to sucess(3), failure(4) or requestNotProcessedByClient(5). If a request has not been triggered explicitly by setting this attribute to initiate, then this field returns the status of the last request.

What is cldccManufacturerInfoStatus?

Controls and reports the state of a request to retrieve manufacturer information from a wireless client; setting it to initiate(1) triggers the request, and the agent updates it as the request progresses (e.g., inProgress).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.1
snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB::cldccManufacturerInfoStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.1.1
snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB::cldccManufacturerInfoStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.1.1 s <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB::cldccManufacturerInfoStatus OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.599ciscoLwappDot11ClientMIBCISCO-LWAPP-DOT11-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3ciscoLwappDot11ClientCcxMIBObjectsCISCO-LWAPP-DOT11-CLIENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.599.3.4ciscoLwappDot11ClientCCXv5ReportingMIBCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB
1.3.6.1.4.1.9.9.599.3.4.1ciscoLwappDot11ClientCCXv5ReportingMIBObjectsCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB
1.3.6.1.4.1.9.9.599.3.4.1.1ciscoClientCcxManuReportingCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB
1.3.6.1.4.1.9.9.599.3.4.1.1.1cldccManufacturerInfoTableCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB
1.3.6.1.4.1.9.9.599.3.4.1.1.1.1cldccManufacturerInfoEntryCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB
1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.1cldccManufacturerInfoStatusCISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB