All MIBs › CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB › cLD11ClientCalibTableMaxEntries
cLD11ClientCalibTableMaxEntries
Module: CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB::cLD11ClientCalibTableMaxEntries
OID (numeric): 1.3.6.1.4.1.9.9.522.1.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the maximum number of entries allowed in cLD11ClientCalibTable.
What is cLD11ClientCalibTableMaxEntries?
A read-write setting that limits the maximum number of entries permitted in the client calibration table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.522.1.1.2 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB::cLD11ClientCalibTableMaxEntries
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.522.1.1.2.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB::cLD11ClientCalibTableMaxEntries.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.522.1.1.2.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB::cLD11ClientCalibTableMaxEntries OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.522 | ciscoLwappDot11ClientCalibMIB | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1 | ciscoLwappDot11ClientCalibMIBObjects | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1.1 | cldccConfig | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1.1.2 | cLD11ClientCalibTableMaxEntries | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |