All MIBs › CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB › cLD11ClientCalibBeaconInterval
cLD11ClientCalibBeaconInterval
Module: CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB::cLD11ClientCalibBeaconInterval
OID (numeric): 1.3.6.1.4.1.9.9.522.1.1.1.1.2
Node type: OBJECT-TYPE
Type: TimeInterval
Access: read-create
Description: This object specifies the time interval, expressed here in hundredths of a second at which an AP issues radio measurement request messages to a client for every SSID. It is not recommended to configure values less than 10 seconds (1000). The value configured through this object is reflected in the operation of the LWAPP APs only if cLD11ClientCalibBeaconEnabled is set to 'true'.
This object has been deprecated and is replaced by the object cLD11ClientCalibBeaconIntervalExt.
What is cLD11ClientCalibBeaconInterval?
A configurable setting (in hundredths of a second) controlling how often an access point sends radio measurement request messages to a client for each SSID during location calibration; values below 10 seconds are discouraged.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.522 | ciscoLwappDot11ClientCalibMIB | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1 | ciscoLwappDot11ClientCalibMIBObjects | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1.1 | cldccConfig | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1.1.1 | cLD11ClientCalibTable | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1.1.1.1 | cLD11ClientCalibEntry | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |
| 1.3.6.1.4.1.9.9.522.1.1.1.1.2 | cLD11ClientCalibBeaconInterval | CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB |