All MIBs › CISCO-LWAPP-CCX-RM-MIB › clcrdot11aBeaconEnabled
clcrdot11aBeaconEnabled
Module: CISCO-LWAPP-CCX-RM-MIB
OID (symbolic): CISCO-LWAPP-CCX-RM-MIB::clcrdot11aBeaconEnabled
OID (numeric): 1.3.6.1.4.1.9.9.520.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies that LWAPP APs would broadcast radio measurement request messages that include a beacon measurement request information element on 802.11a radio to clients compatible to CCX versions 2 and above. This configuration takes higher precedence than that on the radio interface of the particular AP when clcrAPIfOverrideGlobal is set to 'false'. A value of 'true' indicates that the radio measurement request on 802.11a would include a beacon measurement requesst Information Element. A value of 'False' indicates that the radio measurement request on 802.11a would not include a beacon measurement request Information Element.
What is clcrdot11aBeaconEnabled?
Read-write flag that, when enabled, causes LWAPP access points to broadcast 802.11a beacon radio-measurement requests to CCX version 2+ compatible client devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.520.1.1.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-CCX-RM-MIB::clcrdot11aBeaconEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.520.1.1.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-CCX-RM-MIB::clcrdot11aBeaconEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.520.1.1.1.1 s <value>
Start monitoring Cisco Wireless LAN Controller / Lightweight Access Point (CCX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CCX-RM-MIB::clcrdot11aBeaconEnabled OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controller / Lightweight Access Point (CCX) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.520 | ciscoLwappCcxRmMIB | CISCO-LWAPP-CCX-RM-MIB |
| 1.3.6.1.4.1.9.9.520.1 | ciscoLwappCcxRmMIBObjects | CISCO-LWAPP-CCX-RM-MIB |
| 1.3.6.1.4.1.9.9.520.1.1 | clcrDot11aConfigGlobal | CISCO-LWAPP-CCX-RM-MIB |
| 1.3.6.1.4.1.9.9.520.1.1.1 | clcrdot11aBeaconEnabled | CISCO-LWAPP-CCX-RM-MIB |