All MIBs › CISCO-LWAPP-AP-MIB › cLApWipsEnable
cLApWipsEnable
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApWipsEnable
OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.27
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This object represents if this AP is used as WIPS AP. A value of 'true' indicates that this AP is a WIPS AP. A value of 'false' indicates that this AP is not a WIPS AP. This applies only when the AP is either in local or monitor mode.
What is cLApWipsEnable?
Enables or disables WIPS (Wireless Intrusion Protection System) mode on an access point. In WIPS mode, the AP monitors for rogue APs and security threats rather than serving clients. An operator enables this on select APs to create a dedicated security monitoring layer in a large wireless network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.27 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApWipsEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.27.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApWipsEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.27.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1 | ciscoLwappAp | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1 | cLApTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1 | cLApEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1.27 | cLApWipsEnable | CISCO-LWAPP-AP-MIB |