CISCO-LWAPP-AP-MIB :: cLApSecondaryControllerAddress

MIB Reference — IPNetwork Monitor

All MIBsCISCO-LWAPP-AP-MIBcLApSecondaryControllerAddress

cLApSecondaryControllerAddress

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApSecondaryControllerAddress

OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.13

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description:

This object represents the address of the secondary controller that the APs will join.

What is cLApSecondaryControllerAddress?

This OID holds the IP address of the backup wireless controller that access points will use if the primary controller becomes unavailable. Setting this address ensures wireless access points have failover capability when the main controller goes down. An IT administrator would set this value during wireless network setup to specify which backup controller manages APs if primary fails.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.13
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApSecondaryControllerAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.13.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApSecondaryControllerAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.13.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1ciscoLwappApCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1cLApTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1.1cLApEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1.1.13cLApSecondaryControllerAddressCISCO-LWAPP-AP-MIB