All MIBs › CISCO-LWAPP-AP-MIB › cLApRogueDetectionEnabled
cLApRogueDetectionEnabled
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApRogueDetectionEnabled
OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.34
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This object specifies whether Rogue Detection is enabled in this AP. A value of 'true' enables Rogue Detection. A value of 'false' disables Rogue Detection. Rogue detection is not supported on sniffer and rogue detector mode APs.
What is cLApRogueDetectionEnabled?
Read-write flag that enables or disables rogue access point detection on this AP; not supported when the AP is in sniffer or rogue-detector mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.34 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApRogueDetectionEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.34.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApRogueDetectionEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.34.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1 | ciscoLwappAp | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1 | cLApTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1 | cLApEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1.34 | cLApRogueDetectionEnabled | CISCO-LWAPP-AP-MIB |