All MIBs › CISCO-LWAPP-AP-MIB › cLApRetransmitTimeout
cLApRetransmitTimeout
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApRetransmitTimeout
OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.41
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the retransmission timeout for the Access Point Control packet. This value represents the timeout for each retransmission, during the fallback of Access Point to another controller in case of failover. The global retransmit parameters are applicable for all Access Points within a controller. The individual paramters per Access Point, if configured takes precedence over the global values. If an AccessPoint falls back from another controller(in case of failover), the values at the AP level has more precedence over the global values in the controller with which it has joined.
What is cLApRetransmitTimeout?
This object specifies the timeout interval in milliseconds for retransmitting Access Point Control Protocol packets during failover, when an access point attempts to connect to a backup controller. It controls how long the AP waits before retrying transmission on each attempt. An operator configures this value to balance convergence speed against network stability when controllers become unavailable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.41 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApRetransmitTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.41.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApRetransmitTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.41.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApRetransmitTimeout OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1 | ciscoLwappAp | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1 | cLApTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1 | cLApEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1.41 | cLApRetransmitTimeout | CISCO-LWAPP-AP-MIB |