CISCO-LWAPP-AP-MIB :: cLApPwrInjectorSelection

MIB Reference — IPNetwork Monitor

All MIBsCISCO-LWAPP-AP-MIBcLApPwrInjectorSelection

cLApPwrInjectorSelection

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApPwrInjectorSelection

OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.25

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This object specifies the Power Injector selection value of the AP.

'unknown' - is returned if 'cLApPwrInjectorStateEnabled'is set to false. 'installed' - configure the MAC address of the switch port that has a Power Injector. 'override' - override the safety checks and assume a Power Injector is always installed.

What is cLApPwrInjectorSelection?

Configures the Power Injector setting for the AP, such as identifying the MAC address of the switch port that has a Power Injector installed, or reporting unknown if injector support is disabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.25
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApPwrInjectorSelection

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.25.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApPwrInjectorSelection.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.25.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1ciscoLwappApCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1cLApTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1.1cLApEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1.1.25cLApPwrInjectorSelectionCISCO-LWAPP-AP-MIB