All MIBs › CISCO-LWAPP-AP-MIB › cLApPowerStatus

cLApPowerStatus

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApPowerStatus

OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description:

This object represents the power status of the AP low - The AP is drawing low power from Ethernet fifteendotfour - The AP is drawing 15.4 watts from Ethernet sixteendoteight - The AP is drawing 16.8 watts from Ethernet full - The power is high enough for normal operation of the AP. The power source could be Ethernet or external external - The power source is not from Ethernet. mixedmode - The power is high enough for operation of AP. In this state one radio will operate in full power mode while the other radio will be powered off.

What is cLApPowerStatus?

Reports how much power the AP is drawing over Ethernet (e.g. low, 15.4W, or 16.8W), indicating its PoE power state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.20
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApPowerStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.20.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApPowerStatus.1

OID Breakdown

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	BIANCA-BRICK-PPP-MIB
1.3.6	dod	BIANCA-BRICK-PPP-MIB
1.3.6.1	internet	BIANCA-BRICK-PPP-MIB
1.3.6.1.4	private	BIANCA-BRICK-PPP-MIB
1.3.6.1.4.1	enterprises	ANIROOT-MIB
1.3.6.1.4.1.9	cisco	CISCO-SMI
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI
1.3.6.1.4.1.9.9.513	ciscoLwappApMIB	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1	ciscoLwappApMIBObjects	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1	ciscoLwappAp	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1	cLApTable	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1.1	cLApEntry	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.1.1.20	cLApPowerStatus	CISCO-LWAPP-AP-MIB

CISCO-LWAPP-AP-MIB :: cLApPowerStatus

cLApPowerStatus

Module

This MIB depends on