All MIBs › CISCO-LWAPP-AP-MIB › cLApIfSmtDot11Bssid

cLApIfSmtDot11Bssid

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApIfSmtDot11Bssid

OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.2.1.1

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-only

Description: This object defines the base BSSID of this AP, which is the MAC address of the radio interface of this AP.

What is cLApIfSmtDot11Bssid?

Reports the base BSSID (the MAC address of the radio interface) that identifies this access point's wireless service set.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.2.1.1
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApIfSmtDot11Bssid

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.2.1.1.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApIfSmtDot11Bssid.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApIfSmtDot11Bssid OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.513	ciscoLwappApMIB	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1	ciscoLwappApMIBObjects	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1	ciscoLwappAp	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.2	cLApIfSmtParamTable	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.2.1	cLApIfSmtParamEntry	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.1.2.1.1	cLApIfSmtDot11Bssid	CISCO-LWAPP-AP-MIB

CISCO-LWAPP-AP-MIB :: cLApIfSmtDot11Bssid

cLApIfSmtDot11Bssid

Module

This MIB depends on