All MIBs › CISCO-LWAPP-AP-MIB › cLApGlobalFailoverPriority
cLApGlobalFailoverPriority
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApGlobalFailoverPriority
OID (numeric): 1.3.6.1.4.1.9.9.513.1.3.10
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This object represents the Global AP Failover priority. If Enabled, Priorities will be considered of the APs which wishes to join the controller. Preference will be given to the higher priority AP. If the number of associated AP has already reached the limit then the controller will disassociate a lower priority AP to accomodate a higher priority AP. Default is Disabled state.
What is cLApGlobalFailoverPriority?
Read-write setting that enables/configures global AP failover priority, giving higher-priority access points preference to join the controller when the AP association limit has been reached.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.3.10 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApGlobalFailoverPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.3.10.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApGlobalFailoverPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.3.10.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.3 | ciscoLwappApGlobal | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.3.10 | cLApGlobalFailoverPriority | CISCO-LWAPP-AP-MIB |