All MIBs › CISCO-LWAPP-AP-MIB › cLApEthernetIfPOEPower
cLApEthernetIfPOEPower
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfPOEPower
OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents whether this interface supports Power Over Ethernet (POE) none - POE is not supported drawn - This interface supports POE, and power is being drawn notdrawn - POE power is not drawn
What is cLApEthernetIfPOEPower?
This object indicates whether a network interface on a wireless access point supports Power Over Ethernet (POE) and whether power is currently being drawn through it. The value shows one of three states: no POE support, POE is active and drawing power, or POE capable but not currently drawing power. A network technician would check this to verify that an access point has sufficient power supply and to diagnose power-related issues.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.12 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfPOEPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.12.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfPOEPower.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cLApEthernetIfPOEPower.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApEthernetIfPOEPower OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2 | ciscoLwappApIf | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2.2 | cLApEthernetIfTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2.2.1 | cLApEthernetIfEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2.2.1.12 | cLApEthernetIfPOEPower | CISCO-LWAPP-AP-MIB |