CISCO-LWAPP-AP-MIB :: cLApEthernetIfOutputNoBuffer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-AP-MIBcLApEthernetIfOutputNoBuffer

cLApEthernetIfOutputNoBuffer

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputNoBuffer

OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.28

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object represents total number of packets discarded because there was no buffer space.

What is cLApEthernetIfOutputNoBuffer?

This object counts the total number of packets that were discarded from an Ethernet interface on a Cisco LWAPP access point because there was insufficient buffer space available. This indicates memory pressure or congestion. An operator would monitor this to identify when an access point is becoming overwhelmed and may need to be rebooted or load-balanced with traffic from other APs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.28
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputNoBuffer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.28.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputNoBuffer.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputNoBuffer OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2ciscoLwappApIfCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2cLApEthernetIfTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1cLApEthernetIfEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1.28cLApEthernetIfOutputNoBufferCISCO-LWAPP-AP-MIB