CISCO-LWAPP-AP-MIB :: cLApEthernetIfOutputCollision

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-AP-MIBcLApEthernetIfOutputCollision

cLApEthernetIfOutputCollision

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputCollision

OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.27

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object represents total number of packet retransmitted due to an Ethernet collision.

What is cLApEthernetIfOutputCollision?

This OID counts the total number of times an Ethernet port on an access point had to resend packets due to a collision detected on the network. High collision counts indicate network congestion or potential wiring issues on that interface. An operator would monitor this metric to diagnose whether an Ethernet connection is experiencing excessive traffic collisions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.27
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputCollision

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.27.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputCollision.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApEthernetIfOutputCollision OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2ciscoLwappApIfCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2cLApEthernetIfTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1cLApEthernetIfEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1.27cLApEthernetIfOutputCollisionCISCO-LWAPP-AP-MIB