CISCO-LWAPP-AP-MIB :: cLApEthernetIfOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-AP-MIBcLApEthernetIfOperStatus

cLApEthernetIfOperStatus

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfOperStatus

OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object represents the operational state of the physical Ethernet interface on the AP.

What is cLApEthernetIfOperStatus?

This object reports the current operational status of the Ethernet interface on a Cisco Lightweight Access Point, such as up, down, or testing. Network administrators monitor this value to verify that the access point's wired connection to the controller or switch is active and functional. If the status is down or degraded, it indicates a physical layer issue that would prevent the AP from communicating with the controller or delivering traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.5
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.5.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfOperStatus.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApEthernetIfOperStatus OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2ciscoLwappApIfCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2cLApEthernetIfTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1cLApEthernetIfEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1.5cLApEthernetIfOperStatusCISCO-LWAPP-AP-MIB