All MIBs › CISCO-LWAPP-AP-MIB › cLApEthernetIfInputOverrun
cLApEthernetIfInputOverrun
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfInputOverrun
OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.19
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
This object represents the number of times the receiver hardware was incapable of handing received data to a hardware buffer because the input rate exceeded the receiver's capability to handle the data.
What is cLApEthernetIfInputOverrun?
A counter of times the AP's Ethernet receiver hardware could not hand off incoming data to a buffer because the input data rate exceeded its processing capability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.19 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfInputOverrun
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.19.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfInputOverrun.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2 | ciscoLwappApIf | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2.2 | cLApEthernetIfTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2.2.1 | cLApEthernetIfEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.2.2.1.19 | cLApEthernetIfInputOverrun | CISCO-LWAPP-AP-MIB |