CISCO-LWAPP-AP-MIB :: cLApEthernetIfDuplex

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-AP-MIBcLApEthernetIfDuplex

cLApEthernetIfDuplex

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfDuplex

OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object represents interface's duplex mode

What is cLApEthernetIfDuplex?

This OID reports the duplex mode of a wireless access point's Ethernet connection, indicating whether it is half-duplex or full-duplex. Full-duplex allows simultaneous two-way communication; half-duplex requires taking turns. An operator would check this to diagnose network interface performance problems related to duplex mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.10
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfDuplex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.10.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfDuplex.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AP-MIB::cLApEthernetIfDuplex OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2ciscoLwappApIfCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2cLApEthernetIfTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1cLApEthernetIfEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1.10cLApEthernetIfDuplexCISCO-LWAPP-AP-MIB