CISCO-LWAPP-AP-MIB :: cLApEthernetIfAdminStatus

MIB Reference — IPNetwork Monitor

All MIBsCISCO-LWAPP-AP-MIBcLApEthernetIfAdminStatus

cLApEthernetIfAdminStatus

Module: CISCO-LWAPP-AP-MIB

OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEthernetIfAdminStatus

OID (numeric): 1.3.6.1.4.1.9.9.513.1.2.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This object represents the admin state of the physical Ethernet interface on the AP.

What is cLApEthernetIfAdminStatus?

This object represents the administrative state (up or down) of the physical Ethernet interface on a Cisco lightweight access point. An operator uses this to manage whether the wired uplink port is enabled and available to carry traffic between the access point and the wireless controller. Setting this value allows remote shutdown or startup of the Ethernet interface without physical access.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.4
snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.4.1
snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEthernetIfAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.2.2.1.4.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.513ciscoLwappApMIBCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1ciscoLwappApMIBObjectsCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2ciscoLwappApIfCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2cLApEthernetIfTableCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1cLApEthernetIfEntryCISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.2.2.1.4cLApEthernetIfAdminStatusCISCO-LWAPP-AP-MIB