All MIBs › CISCO-LWAPP-AP-MIB › cLApEncryptionEnable
cLApEncryptionEnable
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApEncryptionEnable
OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.18
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This object specifies whether encyrption between controller and AP is enabled or not. Encryption can only be enabled if ESM card in controller is pluged in.
A value of 'true' enables encryption between controller and AP.
A value of 'false' disables encryption between controller and AP.
What is cLApEncryptionEnable?
Read-write flag controlling whether DTLS encryption is used between the controller and the AP; can only be turned on if the controller has an ESM card installed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.18 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEncryptionEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.18.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApEncryptionEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.18.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1 | ciscoLwappAp | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1 | cLApTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1 | cLApEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1.18 | cLApEncryptionEnable | CISCO-LWAPP-AP-MIB |