All MIBs › CISCO-LWAPP-AP-MIB › cLApDomainName
cLApDomainName
Module: CISCO-LWAPP-AP-MIB
OID (symbolic): CISCO-LWAPP-AP-MIB::cLApDomainName
OID (numeric): 1.3.6.1.4.1.9.9.513.1.1.1.1.29
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-write
Description:
This represents the domain, to which the AP belongs. This attribute can be configured only if the static IP option is turned on in the AP.
What is cLApDomainName?
This OID stores the administrative domain name assigned to a wireless access point, such as 'building-1' or 'floor-3'. The domain is used to group access points for management purposes and can only be set when the access point uses a static IP address. An operator would set this when commissioning wireless access points to organize them into logical management groups.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.29 snmpwalk -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApDomainName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.29.1 snmpget -v2c -c public <target> CISCO-LWAPP-AP-MIB::cLApDomainName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.513.1.1.1.1.29.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1 | ciscoLwappApMIBObjects | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1 | ciscoLwappAp | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1 | cLApTable | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1 | cLApEntry | CISCO-LWAPP-AP-MIB |
| 1.3.6.1.4.1.9.9.513.1.1.1.1.29 | cLApDomainName | CISCO-LWAPP-AP-MIB |