All MIBs › CISCO-LWAPP-AAA-MIB › claAAARadiusAuthCallStationIdType

claAAARadiusAuthCallStationIdType

OID (symbolic): CISCO-LWAPP-AAA-MIB::claAAARadiusAuthCallStationIdType

OID (numeric): 1.3.6.1.4.1.9.9.598.1.3.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the call station ID information sent in RADIUS auth messages. ipAddr(0) : Sets Call Station Id Type to the system's IP Address. macAddr(1) : Sets Call Station Id Type to the system's MAC Address. apMacAddress(2) : Sets Call Station Id Type to the AP's Radio MAC Address. apMacAddressSsid(3) : Sets Call Station Id Type to the format :. apNameSsid(4) : Sets Called Station Id to the format :. apName(5) : Sets Called Station Id to the AP Name. apGroupName(6) : Sets Called Station Id to the AP Group Name. flexGroupName(7) : Sets Called Station Id to the Flex Connect Group Name. apLocation(8) : Sets Called Station Id to the AP Location. apVlanId(9) : Sets Called Station Id to the VLAN id. apMacEthAddress(10) : Sets Called Station Id Type to the AP's Ethernet MAC address. apMacEthAddressSsid(11) : Sets Called Station Id Type to the format :. apLabelMac(12) : Sets Call Station Id Type to the AP MAC address printed on APLabel. apLableMacSsid(13) : Sets Call Station Id Type to the format :. apMacSsidApGroup(14) : Sets Called Station Id Type to the format ::.

What is claAAARadiusAuthCallStationIdType?

Configures what identifier (e.g. the system's IP address, MAC address, or AP MAC address) is sent as the Call Station ID in RADIUS authentication messages.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.598.1.3.17
snmpwalk -v2c -c public <target> CISCO-LWAPP-AAA-MIB::claAAARadiusAuthCallStationIdType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.598.1.3.17.1
snmpget -v2c -c public <target> CISCO-LWAPP-AAA-MIB::claAAARadiusAuthCallStationIdType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.598.1.3.17.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-AAA-MIB::claAAARadiusAuthCallStationIdType OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.598	ciscoLwappAAAMIB	CISCO-LWAPP-AAA-MIB
1.3.6.1.4.1.9.9.598.1	ciscoLwappAAAMIBObjects	CISCO-LWAPP-AAA-MIB
1.3.6.1.4.1.9.9.598.1.3	claGlobalObjects	CISCO-LWAPP-AAA-MIB
1.3.6.1.4.1.9.9.598.1.3.17	claAAARadiusAuthCallStationIdType	CISCO-LWAPP-AAA-MIB

CISCO-LWAPP-AAA-MIB :: claAAARadiusAuthCallStationIdType

claAAARadiusAuthCallStationIdType

Module

This MIB depends on