CISCO-IVR-MIB :: civrZonesetActivateForce

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IVR-MIBcivrZonesetActivateForce

civrZonesetActivateForce

Module: CISCO-IVR-MIB

OID (symbolic): CISCO-IVR-MIB::civrZonesetActivateForce

OID (numeric): 1.3.6.1.4.1.9.9.371.1.1.2.13

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The force option for IV zoneset activation. Following things are done if this object is 'true': - If there is no regular active zoneset in a VSAN (no entry present zoneEnforcedZoneSetTable from CISCO-ZS-MIB for that VSAN), then a regular active zoneset will be created and the IV zones will be added to the active zoneset. - if the default zone behaviour (as indicated by object zoneDefaultZoneBehaviour from CISCO-ZS-MIB) is 'permit', then the IV zones will be added to the regular active zoneset.

If the value of this object is 'false', the IV zones are added to the regular active zoneset only in the case of default zone behaviour is 'deny'.

What is civrZonesetActivateForce?

A control enabling forced activation of an IVR zoneset, allowing activation to proceed even when no regular active zoneset currently exists in a VSAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.371.1.1.2.13
snmpwalk -v2c -c public <target> CISCO-IVR-MIB::civrZonesetActivateForce

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.371.1.1.2.13.1
snmpget -v2c -c public <target> CISCO-IVR-MIB::civrZonesetActivateForce.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.371.1.1.2.13.1 s <value>

Start monitoring Cisco MDS Fibre Channel SAN switches (Inter-VSAN Routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IVR-MIB::civrZonesetActivateForce OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches (Inter-VSAN Routing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.371ciscoIvrMIBCISCO-IVR-MIB
1.3.6.1.4.1.9.9.371.1ciscoIvrMIBObjectsCISCO-IVR-MIB
1.3.6.1.4.1.9.9.371.1.1cimIvrConfigurationCISCO-IVR-MIB
1.3.6.1.4.1.9.9.371.1.1.2cimIvrZonesetCISCO-IVR-MIB
1.3.6.1.4.1.9.9.371.1.1.2.13civrZonesetActivateForceCISCO-IVR-MIB