All MIBs › CISCO-IVR-MIB › civrTopologyActiveSwitchVsan4k
civrTopologyActiveSwitchVsan4k
Module: CISCO-IVR-MIB
OID (symbolic): CISCO-IVR-MIB::civrTopologyActiveSwitchVsan4k
OID (numeric): 1.3.6.1.4.1.9.9.371.1.1.5.8.1.4
Node type: OBJECT-TYPE
Type: FcList
Access: read-only
Description: The list of VSANs that are part of IVR topology on this device.
Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through 2054, the second octet specifying VSANs 2055 through 2062, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is contained in the IVR topology on device if and only if that bit has a value of '1'. If this object has a value which is less than 256 bytes long, then the VSANs which are not represented are not considered to be in the list.
If the values of both this object and corresponding instance of civrTopologyActiveSwitchVsan2k are zero-length string, then the IVR topology contains only the default VSAN.
What is civrTopologyActiveSwitchVsan4k?
Reports, as a bitmap, which higher-numbered VSANs (starting at 2047) are part of the active IVR topology on this switch, extending the VSAN range beyond the first 2048.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.371.1.1.5.8.1.4 snmpwalk -v2c -c public <target> CISCO-IVR-MIB::civrTopologyActiveSwitchVsan4k
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.371.1.1.5.8.1.4.1 snmpget -v2c -c public <target> CISCO-IVR-MIB::civrTopologyActiveSwitchVsan4k.1
Start monitoring Cisco MDS Fibre Channel SAN switches (Inter-VSAN Routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IVR-MIB::civrTopologyActiveSwitchVsan4k OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches (Inter-VSAN Routing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.371 | ciscoIvrMIB | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1 | ciscoIvrMIBObjects | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1 | cimIvrConfiguration | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5 | cimIvrTopology | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5.8 | civrTopologyActiveTable | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1 | civrTopologyActiveEntry | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1.4 | civrTopologyActiveSwitchVsan4k | CISCO-IVR-MIB |