All MIBs › CISCO-IVR-MIB › civrTopologyActiveSwitchVsan2k
civrTopologyActiveSwitchVsan2k
Module: CISCO-IVR-MIB
OID (symbolic): CISCO-IVR-MIB::civrTopologyActiveSwitchVsan2k
OID (numeric): 1.3.6.1.4.1.9.9.371.1.1.5.8.1.3
Node type: OBJECT-TYPE
Type: FcList
Access: read-only
Description: The list of VSANs that are part of IVR topology on this device.
Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is contained in the IVR topology on this device if and only if that bit has a value of '1'. If this object has a value which is less than 256 bytes long, then the VSANs which are not represented are not considered to be in this list.
If the values of both this object and corresponding instance of civrTopologyActiveSwitchVsan4k are zero-length string, then the IVR topology contains only the default VSAN.
What is civrTopologyActiveSwitchVsan2k?
Reports, as a bitmap, which VSANs (numbered 0-2047) are part of the active IVR topology on this switch, with each octet encoding eight VSAN memberships.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.371.1.1.5.8.1.3 snmpwalk -v2c -c public <target> CISCO-IVR-MIB::civrTopologyActiveSwitchVsan2k
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.371.1.1.5.8.1.3.1 snmpget -v2c -c public <target> CISCO-IVR-MIB::civrTopologyActiveSwitchVsan2k.1
Start monitoring Cisco MDS Fibre Channel SAN switches (Inter-VSAN Routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IVR-MIB::civrTopologyActiveSwitchVsan2k OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches (Inter-VSAN Routing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.371 | ciscoIvrMIB | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1 | ciscoIvrMIBObjects | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1 | cimIvrConfiguration | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5 | cimIvrTopology | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5.8 | civrTopologyActiveTable | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1 | civrTopologyActiveEntry | CISCO-IVR-MIB |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1.3 | civrTopologyActiveSwitchVsan2k | CISCO-IVR-MIB |