CISCO-ITP-RT-MIB :: cItpRtChangeNotifDelayTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-ITP-RT-MIB › cItpRtChangeNotifDelayTime

cItpRtChangeNotifDelayTime

Module: CISCO-ITP-RT-MIB

OID (symbolic): CISCO-ITP-RT-MIB::cItpRtChangeNotifDelayTime

OID (numeric): 1.3.6.1.4.1.9.9.228.1.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the maximum amount of time to delay before generating the cItpRouteStateChange notification. The delay is introduced to allow multiple route state changes to be bundled into a single notification.

If the value of this object is equal to 0, the device will generate cItpRouteStateChange notification as each route changes states.

If the value of this object is greater than 0, the device will not generate notifications as routes change state. As routes changes state they are accumulated until the time specified in cItpRtChangeNotifDelayTime has elapsed or enough state changes have been accumulated to fill up the cItprtNotifInfoStateChanges object.

This object is ignored by the agent when the cItpRtStateChangeNotifEnabled object is set to the 'false' value.

What is cItpRtChangeNotifDelayTime?

Configures the maximum delay before sending a cItpRouteStateChange notification, allowing multiple route state changes to be bundled into one notification instead of sending many separately.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.228.1.1.6
snmpwalk -v2c -c public <target> CISCO-ITP-RT-MIB::cItpRtChangeNotifDelayTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.228.1.1.6.1
snmpget -v2c -c public <target> CISCO-ITP-RT-MIB::cItpRtChangeNotifDelayTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.228.1.1.6.1 i <value>

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ITP-RT-MIB::cItpRtChangeNotifDelayTime OID value, configure state conditions and alerts, and monitor any Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.228ciscoItpRtMIBCISCO-ITP-RT-MIB
1.3.6.1.4.1.9.9.228.1cItpRtMIBObjectsCISCO-ITP-RT-MIB
1.3.6.1.4.1.9.9.228.1.1cItpRtScalarsCISCO-ITP-RT-MIB
1.3.6.1.4.1.9.9.228.1.1.6cItpRtChangeNotifDelayTimeCISCO-ITP-RT-MIB