CISCO-ISNS-IP-NW-DISCOVERY-MIB :: ciscoIsnsIpNetDiscoveryCommand

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-ISNS-IP-NW-DISCOVERY-MIB › ciscoIsnsIpNetDiscoveryCommand

ciscoIsnsIpNetDiscoveryCommand

Module: CISCO-ISNS-IP-NW-DISCOVERY-MIB

OID (symbolic): CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCommand

OID (numeric): 1.3.6.1.4.1.9.9.434.1.2.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The IP network discovery command to be executed.

Command Remarks

all Run IP network discovery for all the gigabit ethernet interfaces in the fabric.

noOp no operation will be performed.

ipNetworkSpecific Run IP network discovery for all gigabit ethernet interfaces that are configured to be members of the IP network name specified in the 'ciscoIsnsIpNetToDiscover' object.

interfaceSpecific Run IP network discovery incrementally for the gigabit ethernet interface specified in the 'ciscoIsnsGigEInterfaceToDiscover' object.

The value of this object when read is always 'noOp'.

What is ciscoIsnsIpNetDiscoveryCommand?

This read-write object issues an IP network discovery command, such as running discovery for all gigabit Ethernet interfaces in the fabric or performing no operation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.434.1.2.4
snmpwalk -v2c -c public <target> CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCommand

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.434.1.2.4.1
snmpget -v2c -c public <target> CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCommand.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.434.1.2.4.1 i <value>

Start monitoring Cisco MDS-series multilayer SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCommand OID value, configure state conditions and alerts, and monitor any Cisco MDS-series multilayer SAN switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.434ciscoIpNetworkDiscoveryMIBCISCO-IP-NW-DISCOVERY-MIB
1.3.6.1.4.1.9.9.434.1cIpNetworkDiscoveryMIBObjsCISCO-IP-NW-DISCOVERY-MIB
1.3.6.1.4.1.9.9.434.1.2cIpNetworkDiscoveryInfoCISCO-IP-NW-DISCOVERY-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.434.1.2.4ciscoIsnsIpNetDiscoveryCommandCISCO-ISNS-IP-NW-DISCOVERY-MIB