All MIBs › CISCO-ISNS-IP-NW-DISCOVERY-MIB › ciscoIsnsIpNetDiscoveryCmdStatus
ciscoIsnsIpNetDiscoveryCmdStatus
Module: CISCO-ISNS-IP-NW-DISCOVERY-MIB
OID (symbolic): CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCmdStatus
OID (numeric): 1.3.6.1.4.1.9.9.434.1.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of the last IP network discovery command operation.
success (1) - IP network discovery operation completed successfully.
none (2) - no IP network discovery operation is performed.
inProgress (3) - discovery operation is in progress.
noIpNetworkNameSpecified (4) - IP network name not specified, i.e., the value of 'ciscoIsnsIpNetToDiscover' object is set to empty string.
invalidIpNetworkName (5) - IP network is not configured.
NoGigEInterfaceIndexSpecified (6) - 'ifIndex' of the gigabit eithernet interface is not specified, i.e., the value of 'ciscoIsnsGigEInterfaceToDiscover' object is set to '0'.
invalidGigEInterfaceIndex (7) - 'ifIndex' of the gigabit ethernet interface specified in the 'ciscoIsnsGigEInterfaceToDiscover' object is not valid.
generalFailure (8)- General IP network discovery operation Failure.
What is ciscoIsnsIpNetDiscoveryCmdStatus?
This read-only object reports the outcome of the most recently issued IP network discovery command, indicating success or that no operation was performed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.434.1.2.5 snmpwalk -v2c -c public <target> CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.434.1.2.5.1 snmpget -v2c -c public <target> CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCmdStatus.1
Start monitoring Cisco MDS-series multilayer SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ISNS-IP-NW-DISCOVERY-MIB::ciscoIsnsIpNetDiscoveryCmdStatus OID value, configure state conditions and alerts, and monitor any Cisco MDS-series multilayer SAN switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB | CISCO-IP-NW-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.434.1 | cIpNetworkDiscoveryMIBObjs | CISCO-IP-NW-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.434.1.2 | cIpNetworkDiscoveryInfo | CISCO-IP-NW-DISCOVERY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.434.1.2.5 | ciscoIsnsIpNetDiscoveryCmdStatus | CISCO-ISNS-IP-NW-DISCOVERY-MIB |